No, we decided to make two different compromise-free frames. They are not convertible.

The V10 uses ISCG-05 mounts and fits most standard chainguides. We've been using MRP and E13 guides here, but most will bolt on no problem.

The bike ships in the short position, and nothing unusual is required for this setting. The brake mount is Post-Mount 180, so just add whatever adaptor you need to make it work for your chosen rotor size (none if you want 180). Included with the bike is a special brake adaptor to adjust to the long setting. This setting only works with 200mm or larger rotors- use the included 1.5mm spacers between your caliper and the bracket if you are using 203. Omit them if you are using 200mm. Once you've changed the adaptor, install the long derailleur hanger and then flip the chip around in the non-drive dropout.

Yes, as long as you want 29". We're offering the exact wheels the Team rides, with Chris King hubs, DT Competition Race spokes, and Reserve DH 29" rims. This isn't an offering on any of the complete bikes, only as an aftermarket item.

The leverage curve was definitely designed with a coil in mind, but DH-oriented air shocks will feel good as well. The Fox Float X2 does work, as long as the air valve is oriented correctly. It must be oriented at the 10 o'clock position, when viewed from the rear. Unfortunately, the Rockshox Super Deluxe AIR shock does not fit, due to interference with the rebound knob. The Super Deluxe Coil fits no problem.

Good question. There's a lot of personal preference at play here, as with most 29" vs 27.5" discussions. As usual, 29" will roll faster and get you a bit more traction. 27.5" will be more nimble and accelerate quicker. Pick your poison depending on what's most important to you. We don't really recommend the 29" bike for riders shorter than 5'7" or so, as the wheel will get awful close to you when you're getting full travel!

The V10 is designed to use a 49mm external lower cup, and an internal (Zero-Stack) upper cup. This gives maximum flexibility for geometry-changing headsets without changing stack or BB height